Item
WhiteNoiseFPV x TBS Race Wire
WhiteNoiseFPVとTBSがコラボしたRace Wireです。
プロペラによるモーター線切断を回避します。
またモーター交換がより簡単になるので、レース大会中にも重宝します。
DCLや海外選手が使用しているのを多く見かけdknbFPVも使用しはじめました。
1セット6本入りです。
Prevent prop strikes from dropping you out of the air with Race Wire, PCB motor wire that prevents damage to wires, while also making motor swaps super fast and easy in the process!
Race Wire is the perfect upgrade for your racing or freestyle rig. It simply replaces a section of your motor wires under the tips of the propeller which makes your quad immune to prop strike damage. If a prop is bent in a crash, the tip will deflect off of the Race Wire board. From testing, the prop will only scuff the surface.
After installing Race Wire, you’ll be able to perform motor swaps very quickly and without the need to open up your quad to access your 4in1 ESC or AIO board. It also allows for a flat surface from which you can mount top facing LEDs.
Race Wire is designed with 2oz copper and a 2 layer board which provide virtually no difference in resistance and weight difference when compared to standard 20AWG motor wire.
With Race Wire installed, you also have the option of using the Racelite LEDs that solder directly onto the Race Wire.
Specifications
2oz 2layer copper board
40 x 8.5 x 0.8mm
Tested with 5S and 6S setups
Comes in a set of 6 individual boards.
Isolation between the carbon and the board is still required.
Includes
6x Race Wire
プロペラによるモーター線切断を回避します。
またモーター交換がより簡単になるので、レース大会中にも重宝します。
DCLや海外選手が使用しているのを多く見かけdknbFPVも使用しはじめました。
1セット6本入りです。
Prevent prop strikes from dropping you out of the air with Race Wire, PCB motor wire that prevents damage to wires, while also making motor swaps super fast and easy in the process!
Race Wire is the perfect upgrade for your racing or freestyle rig. It simply replaces a section of your motor wires under the tips of the propeller which makes your quad immune to prop strike damage. If a prop is bent in a crash, the tip will deflect off of the Race Wire board. From testing, the prop will only scuff the surface.
After installing Race Wire, you’ll be able to perform motor swaps very quickly and without the need to open up your quad to access your 4in1 ESC or AIO board. It also allows for a flat surface from which you can mount top facing LEDs.
Race Wire is designed with 2oz copper and a 2 layer board which provide virtually no difference in resistance and weight difference when compared to standard 20AWG motor wire.
With Race Wire installed, you also have the option of using the Racelite LEDs that solder directly onto the Race Wire.
Specifications
2oz 2layer copper board
40 x 8.5 x 0.8mm
Tested with 5S and 6S setups
Comes in a set of 6 individual boards.
Isolation between the carbon and the board is still required.
Includes
6x Race Wire
関連商品
ショップの評価
-
特注品
-
FuriousFPV True-D X (for Fatshark Dominators)
-
BETAFPV Canopy for EOS2 Camera
-
TBS UNIFY PRO 5G8 HV (SMA)
-
TBS UNIFY PRO 5G8 HV 7-Pin Vtx Pigtail
-
BetaFPV Beta75X用 LED Board (2PCS)
-
AC900 Dual Mode Receiver (FrSky & FUTABA)
-
Power Whoop Connector Cable Set for Beta85X
-
特別商品
-
Vector Gekko Tx Stick End M3/M4 V2
M4
-
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)
-
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole) Blue
-
BETAFPV A01 VTX + EOS2 Camera
-
FuriousFPV True-D X Cover Bundle - 3色セット
-
FuriousFPV True-D X Cover Bundle - 3色セット
-
A01 VTX固定用ネジ（4pcs）
-
BETAFPV F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)
-
F4 V2 4S Brushless Flight Controller
-
Vector VX-05 X Lower Frame
-
特別商品
