Item
※予約商品【FPV】Beta85X Whoop Quadcopter
ご予約と同時にお支払いいただいたお客様には、
特別価格￥17,719にて販売させていただきます。
お気軽にお問い合わせ下さい＾＾
※ 入荷は3月上旬を予定しております。
75Xをよりパワーアップし、外でのFreestyleで大活躍！
※FPV版には録画機能はありません
Futaba受信機搭載版となります。
As the newest generation of X series, Beta85X absolutely is a whoop drone of extreme.
Beta85X initiates a new concept of cine whoop to make the whole flying experience fun in a whoop drone.
■BULLET POINT
Beta85X pushes the new era of brushless whoop drones to a higher level.
With the new power system, you could fly real acro even with a HD camera in racing or freestyle.
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware.
This is also the first 2" BNF drone that come with BLHeli-32 ESC.
Durable and light enough frame is customized for the Beta85X.
Except the traditional carbon fiber frame, another choice of plastic frame for your 2" props drone.
Whole drone no soldering or tinkering necessary. Customized lightest 1105 6000KV motors with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
450mAh 4S high rate battery is recommend by default.
But pilot could also use their own batteries with battery strap.
Optional and affordable.
■SPECIFICATION
Weight: 58g (without battery)
Motors: 1105 6000KV with connector
Props: EMAX Avan 2" 4-Blades Props
FPV Camera: Customized EOS2 Camera ( for FPV version)
HD DVR Camera: CADDX Turtle V2 ( for HD DVR version)
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Frame: Beta85X Frame
5.8G VTX antenna: Customized Lumenier AXII antenna
Battery strap fit for micro 3S-4S battery
■FC SPECIFICATIONS
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
https://www.dknbfpv.com/items/14877979
■ESC SPECIFICATIONS
MCU:STM32F051
Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 2S-4S lipo
Cotinue current: 16A
Peak current: 25A
BLHELI_32 Firmware target: BETAFPV-16A-32bit
■FPV Camera and VTX
Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Customized Lumenier AXII antenna
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Customized EOS2 FPV camera
TV System: NTSC
Field of view: 100-120 degrees with 1/3 lens
■HD DVR VERSION
The primary purpose of the Beta85X drone is for a cinematic whoop drone.
Many polits revamp their Beta75X to HD whoop drone--They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video.
Inspired by this, we want to provide a BNF whoop drone with HD DVR camera by default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.
In the Beta85X design, the part of HD DVR is independent from the drone.
You could mount or remove the HD DVR part very easy. In default, the drone is come with CADDX Turtle V2 HD camera and the camera tilt is switchable from 25 to 35 degree.
The canopy for HD DVR camera is 3d printing with SLA, which is compatible with Runcam Split Mini 2.
■BLHELI_32 ESC
BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC‘s that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
Beta85X is the first 2" BNF drone that supports BLHeli_32 ESC. With the other power system parts, EMAX Avan 2" propellers and 1105 6000KV motors, it gives you the highest performance in flying experience.
■AXII ANTENNA
We lost a bunch of prototype drones because of this AXII antenna. Why? The 5.8g VTX signal is still perfect when the RC radio transmitter connection break. This is why we choose this micro antenna for the Beta85X.
Micro AXII 5.8GHz Antenna is the next evolution of the world's most popular FPV antenna, desinged by TrueRC and manufacted by Lumenier.
■CUSTOMIZED EOS2
Which camera is most popular on brushless whoop drones? That must be CADDX EOS2. Ligher, smaller but still have perfect image performance. Now it is the stock camera for Beta85X drone. At the same time, the 5.8g VTX board has all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.
The EOS2 camera comes with the FPV version of Beta85X drone. The camera tilt angle is switchable from 25 degree to 45. So that it could support different flying situations (indoors and outdoors alike).
PACKAGE
1 * Beta85X BNF 2S Whoop Quadcopter
1 * Spare EMAX Avan 2" props (2CW+2CCW)
1 * Spare Canopy
There are no batteries included for all version. You should purchase 3-4S batteries (XT30) seperated.
特別価格￥17,719にて販売させていただきます。
お気軽にお問い合わせ下さい＾＾
※ 入荷は3月上旬を予定しております。
75Xをよりパワーアップし、外でのFreestyleで大活躍！
※FPV版には録画機能はありません
Futaba受信機搭載版となります。
As the newest generation of X series, Beta85X absolutely is a whoop drone of extreme.
Beta85X initiates a new concept of cine whoop to make the whole flying experience fun in a whoop drone.
■BULLET POINT
Beta85X pushes the new era of brushless whoop drones to a higher level.
With the new power system, you could fly real acro even with a HD camera in racing or freestyle.
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware.
This is also the first 2" BNF drone that come with BLHeli-32 ESC.
Durable and light enough frame is customized for the Beta85X.
Except the traditional carbon fiber frame, another choice of plastic frame for your 2" props drone.
Whole drone no soldering or tinkering necessary. Customized lightest 1105 6000KV motors with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
450mAh 4S high rate battery is recommend by default.
But pilot could also use their own batteries with battery strap.
Optional and affordable.
■SPECIFICATION
Weight: 58g (without battery)
Motors: 1105 6000KV with connector
Props: EMAX Avan 2" 4-Blades Props
FPV Camera: Customized EOS2 Camera ( for FPV version)
HD DVR Camera: CADDX Turtle V2 ( for HD DVR version)
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
Frame: Beta85X Frame
5.8G VTX antenna: Customized Lumenier AXII antenna
Battery strap fit for micro 3S-4S battery
■FC SPECIFICATIONS
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
https://www.dknbfpv.com/items/14877979
■ESC SPECIFICATIONS
MCU:STM32F051
Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input voltage: 2S-4S lipo
Cotinue current: 16A
Peak current: 25A
BLHELI_32 Firmware target: BETAFPV-16A-32bit
■FPV Camera and VTX
Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Customized Lumenier AXII antenna
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Customized EOS2 FPV camera
TV System: NTSC
Field of view: 100-120 degrees with 1/3 lens
■HD DVR VERSION
The primary purpose of the Beta85X drone is for a cinematic whoop drone.
Many polits revamp their Beta75X to HD whoop drone--They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video.
Inspired by this, we want to provide a BNF whoop drone with HD DVR camera by default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.
In the Beta85X design, the part of HD DVR is independent from the drone.
You could mount or remove the HD DVR part very easy. In default, the drone is come with CADDX Turtle V2 HD camera and the camera tilt is switchable from 25 to 35 degree.
The canopy for HD DVR camera is 3d printing with SLA, which is compatible with Runcam Split Mini 2.
■BLHELI_32 ESC
BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, which is written for ESC‘s that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
Beta85X is the first 2" BNF drone that supports BLHeli_32 ESC. With the other power system parts, EMAX Avan 2" propellers and 1105 6000KV motors, it gives you the highest performance in flying experience.
■AXII ANTENNA
We lost a bunch of prototype drones because of this AXII antenna. Why? The 5.8g VTX signal is still perfect when the RC radio transmitter connection break. This is why we choose this micro antenna for the Beta85X.
Micro AXII 5.8GHz Antenna is the next evolution of the world's most popular FPV antenna, desinged by TrueRC and manufacted by Lumenier.
■CUSTOMIZED EOS2
Which camera is most popular on brushless whoop drones? That must be CADDX EOS2. Ligher, smaller but still have perfect image performance. Now it is the stock camera for Beta85X drone. At the same time, the 5.8g VTX board has all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.
The EOS2 camera comes with the FPV version of Beta85X drone. The camera tilt angle is switchable from 25 degree to 45. So that it could support different flying situations (indoors and outdoors alike).
PACKAGE
1 * Beta85X BNF 2S Whoop Quadcopter
1 * Spare EMAX Avan 2" props (2CW+2CCW)
1 * Spare Canopy
There are no batteries included for all version. You should purchase 3-4S batteries (XT30) seperated.
¥ 18,0802%OFF
¥ 17,719
関連商品
ショップの評価
-
TBS Unify Pro32 Nano 5G8
-
【4個セット】T-motor MCK Racing motor for 4S
-
特注品
-
Gemfan 51499 Hurricane Durable 3 Blade Clear Yellow
-
Gemfan 51499 Hurricane Durable 3 Blade Clear Purple
-
BetaFPV Beta75X用 LED Board (2PCS)
-
BetaFPV F4 2S Brushless ESC 10A (XT30)
-
Gemfan 51499 Hurricane Durable 3 Blade Clear Blue
-
FORTINI F4 OSD 32Khz Flight Controller Rev.3
-
TBS Unify Pro HV 5G8 - Race (SMA)
-
【購入前にブログ要確認】BetaFPV Beta75X 2S Whoop Quadcopter ※入荷日未確定のため予約販売
-
2S Whoop Cable Pigtail (XT30)
-
【4個セット】T-motor F60 PROⅡ KV2700
-
FORTINI F4 OSD 32Khz Flight Controller
-
【鈴木匠選手使用】Vector VX-05 S(stretched) Frame kit
-
Spedix GS40 40A 2-6s BLHeli32 4-in-1 ESC
-
TBS UNIFY PRO 5G8 HV 7-Pin Vtx Pigtail
-
TBS Unify Pro HV 5G8 - Race (SMA)
-
Vector VX-05 X Arm(5inch)
-
【dknbFPV使用】Vector VX-05 X(Genuine X) Frame kit
