Item
BETAFPV Canopy for EOS2 Camera
EOS2 カメラを75X 85Xに取付できるキャノピーが新登場
Beta75Xが新しく進化しました！
カメラもCaddx EOS2へと進化した為、それに合わせてキャノピーも改良されました。
また従来よりも強度がグンと高くなりましたので、クラッシュにも安心です。
新型VTX A01もキャノピーに固定できる専用設計となっております。
カメラ角度も25～45度の可変式タイプとなります。
A01 VTX固定用のネジはこちら
https://www.dknbfpv.com/items/21370300
Awesome canopy with PC material, gain all the advantages of tough, strong, flexible and heat-rersistant. With adjustable 25°- 45° angle, this canopy is perfectly suitable for the EOS2 camera, and also compatible with Beta85X, Beta75X and Beta75 Pro 2. You can use it for DIY building of Beta75X or Beta75 Pro 2 with EOS2 camera.
BULLET POINT
This canopy is made of PC material, which is anti-ruin and heat-resistant, with high strength and toughness, provide well protection for the drone.
Ajustable Angle: 25°- 45° adjustable so that it could support different flying situations (freestyle or racing alike).
Thoughtful design on installation: Specially designed with EOS2 mounting holes and VTX mounting holes, no need to install the fixed mount anymore.
SPECIFICATION
Material: PC
Weight: about 2.4g
Tilt Angle: 25°-45° Adjustable
Adapt Camera: EOS2 camera
Adapt Frame: Beta75X Frame, Beta75 Pro 2 Frame and Beta 85X Frame
Beta75Xが新しく進化しました！
カメラもCaddx EOS2へと進化した為、それに合わせてキャノピーも改良されました。
また従来よりも強度がグンと高くなりましたので、クラッシュにも安心です。
新型VTX A01もキャノピーに固定できる専用設計となっております。
カメラ角度も25～45度の可変式タイプとなります。
A01 VTX固定用のネジはこちら
https://www.dknbfpv.com/items/21370300
Awesome canopy with PC material, gain all the advantages of tough, strong, flexible and heat-rersistant. With adjustable 25°- 45° angle, this canopy is perfectly suitable for the EOS2 camera, and also compatible with Beta85X, Beta75X and Beta75 Pro 2. You can use it for DIY building of Beta75X or Beta75 Pro 2 with EOS2 camera.
BULLET POINT
This canopy is made of PC material, which is anti-ruin and heat-resistant, with high strength and toughness, provide well protection for the drone.
Ajustable Angle: 25°- 45° adjustable so that it could support different flying situations (freestyle or racing alike).
Thoughtful design on installation: Specially designed with EOS2 mounting holes and VTX mounting holes, no need to install the fixed mount anymore.
SPECIFICATION
Material: PC
Weight: about 2.4g
Tilt Angle: 25°-45° Adjustable
Adapt Camera: EOS2 camera
Adapt Frame: Beta75X Frame, Beta75 Pro 2 Frame and Beta 85X Frame
関連商品
ショップの評価
-
TBS Unify Pro32 HV (MMCX)
-
TBS TANGO LANYARD
-
TBS UNIFY PRO 5G8 HV (SMA)
-
特注品
-
FuriousFPV True-D X (for Fatshark Dominators)
-
BETAFPV Canopy for EOS2 Camera
-
TBS UNIFY PRO 5G8 HV (SMA)
-
TBS UNIFY PRO 5G8 HV 7-Pin Vtx Pigtail
-
BetaFPV Beta75X用 LED Board (2PCS)
-
AC900 Dual Mode Receiver (FrSky & FUTABA)
-
Power Whoop Connector Cable Set for Beta85X
-
特別商品
-
Vector Gekko Tx Stick End M3/M4 V2
M4
-
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)
-
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole) Blue
-
BETAFPV A01 VTX + EOS2 Camera
-
FuriousFPV True-D X Cover Bundle - 3色セット
-
FuriousFPV True-D X Cover Bundle - 3色セット
-
A01 VTX固定用ネジ（4pcs）
-
BETAFPV F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S)
