Item
BETAFPV 1103 Brushless Motors 8000KV (3S)
Beta75X 3S仕様の為に開発された軽量モーター
従来のBeta75Xを３Sバッテリー仕様に改造する際は、こちらの8000KVモーターをご使用下さい。
２Sで仕様する際は、従来の11000KVモーターを使用した方が最終的なスピードは高くなります。
初心者の方には、こちらのモーターで2Sバッテリーを使用した方が、出力が押さえられて練習には良いと思います。
Lightest 1103 motors in the world. Come with two KV options:
11000KV- customized for Beta75X 2S, powerful and durable.
8000KV- specially made for Beta75X 3S, Beta75X HD also suitable for most 3S whoop on the market, provide you with much more thrust.
A header pins connector is included. So no soldering needed, just plug and play.
1103 Motors: 8000KV
Recommend Battery: 3S
Voltage: 3.7V-11.1V
Weight: 3.8g
Cable Length: 45mm
Note: DO NOT recommend the 0802 11000KV motors for 3S power. If you try this combo, the motors will overheat and burn (maybe the ESC). As a result, it will cause permanently damage on the motor or ESC.
BULLET POINTS
1103 brushless motors are customized for Beta75X. 8000KV is the best recommendation for Beta75X 3S. 11000KV is the most suitable motor for Beta75X 2S.
With strenthened cable, it is more thicker which will not easy to break off, specially lengthened motor wires is suitable for toothpick drones.
Multiple applicable props for you to choose: 1735, 1935, 2030, 3020 propellers.
Shaft diameter is 1.5mm, convenient installation with Micro JST-1.25 3-pin connector.
Compatible with 2S and 3S lipo battery, focusing on power, efficiency and durability.
RECOMMENDED PARTS
Propellers: 40mm 4-blade props (1.5mm shaft hole)
Frame: Beta75X frame
FC & ESC: F4 2-4S AIO Brushless FC 12A
SPECIFICATION
Height: 14mm
Weight: about 3.2g (11000KV) / 3.8g (8000KV)
Shaft: φ1.5mm
Motor Mount Holes: M1.6 on Dia 8.5mm
KV (rpm/V): 11000
Plug: Micro JST-1.25 3-pins connector
従来のBeta75Xを３Sバッテリー仕様に改造する際は、こちらの8000KVモーターをご使用下さい。
２Sで仕様する際は、従来の11000KVモーターを使用した方が最終的なスピードは高くなります。
初心者の方には、こちらのモーターで2Sバッテリーを使用した方が、出力が押さえられて練習には良いと思います。
Lightest 1103 motors in the world. Come with two KV options:
11000KV- customized for Beta75X 2S, powerful and durable.
8000KV- specially made for Beta75X 3S, Beta75X HD also suitable for most 3S whoop on the market, provide you with much more thrust.
A header pins connector is included. So no soldering needed, just plug and play.
1103 Motors: 8000KV
Recommend Battery: 3S
Voltage: 3.7V-11.1V
Weight: 3.8g
Cable Length: 45mm
Note: DO NOT recommend the 0802 11000KV motors for 3S power. If you try this combo, the motors will overheat and burn (maybe the ESC). As a result, it will cause permanently damage on the motor or ESC.
BULLET POINTS
1103 brushless motors are customized for Beta75X. 8000KV is the best recommendation for Beta75X 3S. 11000KV is the most suitable motor for Beta75X 2S.
With strenthened cable, it is more thicker which will not easy to break off, specially lengthened motor wires is suitable for toothpick drones.
Multiple applicable props for you to choose: 1735, 1935, 2030, 3020 propellers.
Shaft diameter is 1.5mm, convenient installation with Micro JST-1.25 3-pin connector.
Compatible with 2S and 3S lipo battery, focusing on power, efficiency and durability.
RECOMMENDED PARTS
Propellers: 40mm 4-blade props (1.5mm shaft hole)
Frame: Beta75X frame
FC & ESC: F4 2-4S AIO Brushless FC 12A
SPECIFICATION
Height: 14mm
Weight: about 3.2g (11000KV) / 3.8g (8000KV)
Shaft: φ1.5mm
Motor Mount Holes: M1.6 on Dia 8.5mm
KV (rpm/V): 11000
Plug: Micro JST-1.25 3-pins connector
関連商品
ショップの評価
-
Vector VX-04
-
Vector VX-05 Top Plate
-
Vector VX05 フレーム予備用ネジ
-
Vector VX-05 CCD Mount (Runcam、Caddx)
-
Vector VX-05 CCD Mount (Foxeer)
-
FatShark 1800mAh 7.4v Battery Pack USB Charging LED Indicator
-
BetaFPV F4 2S Brushless Flight Controller
-
TBS Unify Pro HV 5G8 - Race (SMA)
-
AC900 Dual Mode Receiver (FrSky & FUTABA)
-
Vector One-click Anti-vibration Mount set (for Revolt & Fortini FC)
-
BetaFPV Beta75X用 LED Board (2PCS)
-
特別商品
-
BETAFPV 1105 Brushless Motors 5000KV (4S)
-
BETAFPV 1103 Brushless Motors 8000KV (3S)
-
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)
-
Fat Shark HDO電源ボタン改造 ※他商品との同梱不可
-
Beta75X Whoop Frame (White)
-
Beta75X Whoop Frame (Black)
-
Vector VQ221 Top Plate
-
Vector Gekko Tx Stick End M3/M4 V2
M3
