Item
F4 2S AIO Brushless Flight Controller (SPI Futaba)
Beta65 Pro2、Beta75 Pro2用のESC一体型フライトコントローラー
2Sのブラシレス機に最適で軽量
Futaba受信機も一体型となっております。
This AIO F4 FC is suitable for a lighter 2S whoop drone, like Beta65 Pro 2 or Beta75 Pro 2 etc.
It integrated a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. So the 2S drone could save many weight for a faster fly experience.
SPECIFICATIONS OF FC
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, fully compatible with the all whoop drone mounting pattern, recommend the Beta65X frame and Beta75 Pro frame.
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Built in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky FCC radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module. Not compatible with Frsky LBT protocol.
Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4.5g
SPECIFICATIONS OF ESC
Built-in ESC with 5A continuous and peak 6A current
Power supply: 1-2S
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
2Sのブラシレス機に最適で軽量
Futaba受信機も一体型となっております。
This AIO F4 FC is suitable for a lighter 2S whoop drone, like Beta65 Pro 2 or Beta75 Pro 2 etc.
It integrated a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. So the 2S drone could save many weight for a faster fly experience.
SPECIFICATIONS OF FC
CPU: STM32F411CEU6 (100MHZ )
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 26mm x 26mm, fully compatible with the all whoop drone mounting pattern, recommend the Beta65X frame and Beta75 Pro frame.
Firmware version: betaflight_matekf411rx_4.0.0 (Development Version)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Built in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky FCC radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module. Not compatible with Frsky LBT protocol.
Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 4.5g
SPECIFICATIONS OF ESC
Built-in ESC with 5A continuous and peak 6A current
Power supply: 1-2S
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
関連商品
ショップの評価
-
シミュレーターケーブル
-
Vector Landing Plate
-
Vector VQ221 Top Plate
-
【送料込】Fat Shark Dominator HDO 2 FPV Goggles
-
TBS UNIFY PRO 5G8 HV (SMA)
-
TBS UNIFY PRO 5G8 HV 7-Pin Vtx Pigtail
-
TBS FUSION VAS Antenna Pack
-
Vector VX-04
-
Vector VX-05 Top Plate
-
Vector VX05 フレーム予備用ネジ
-
Vector VX-05 CCD Mount (Runcam、Caddx)
-
Vector VX-05 CCD Mount (Foxeer)
-
FatShark 1800mAh 7.4v Battery Pack USB Charging LED Indicator
-
BetaFPV F4 2S Brushless Flight Controller
-
TBS Unify Pro HV 5G8 - Race (SMA)
-
AC900 Dual Mode Receiver (FrSky & FUTABA)
-
Vector One-click Anti-vibration Mount set (for Revolt & Fortini FC)
-
BetaFPV Beta75X用 LED Board (2PCS)
-
特別商品
-
BETAFPV 1105 Brushless Motors 5000KV (4S)
