Item

Beta85X 4K Whoop Quadcopter (4S) Futaba(S-FHSS)仕様 

Beta85X 4K Whoop Quadcopter (4S) Futaba(S-FHSS)仕様 
Beta85X 4K CineWhoop 遂に登場!!
Futaba(S-FHSS)仕様

Caddx Tarsier搭載により4K録画が可能となりました。
画質を4KからFHDに落としても、75XHDに搭載されているCADDX Turtle V2 ( for HD DVR version)より高画質となっております。

※4Kカメラ Tarsierのマニュアルはこちら
https://caddxfpv.com/pages/download

※VTXの系統図はこちら
https://drive.google.com/file/d/1U6F43rFyKVbLO8y4rBwW4AAH-mbPdYtX/view?usp=sharing

Beta85X 4K 4S Whoop - it is undoubtedly the smallest 4S 4K drone.
Sufficient inventory and prompt delivery.

Since YKS has shared his cinewhoop 4K with a stunning videography, people are fascinated in 4K whoop.
So here we are. A real 4S 4K Beta85X whoop!!!
Upgraded F4 V2 FC with BLHeli_32 16A ESC, using single N-channel MosFETs, makes the structure and performance more stable and support 4S power definetly.
Mounting with Tarsier 4K camera, great choice for cruising, so you can get tons of fun in this cine whoop.

BULLET POINT
F4 V2 FC board has added extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.
High performance STM32F405 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD).
Faster input signals with lower latency and higher update rate are reachable.
Using single N-channel MosFETs on ESC board which have a lower inner resistance.
It is dual MosFETs on the original BLHeli_32 ESC board.
Soldering with 25V/220uf electrolytic capacitor, for protecting ESC board, reducing the defective rate caused by the instantaneous high voltage.

Installed with Caddx Tarsier 4K camera with ND8 fliter which supports APP setting and switchable resolution setting of 4K, 2.7k, 1440P, 1080P.
Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed. Motor comes with cable connectors.
Durable and light enough frame is customized for the Beta85X.
To increase its stability, we specially add an extra stiffener brace of carbon fiber.
Whole drone no soldering or tinkering necessary.
450mAh 4S high rate battery is recommended by default.
But pilot could also use their own batteries with battery strap. Optional and affordable.
For 85mm brushless whoop drones, there are 3 versions for your choice - Beta85X FPV, Beta85X HD and Beta85X 4K.

SPECIFICATION
BETA85X SPECIFICATIONS

Weight: 88.6g (without battery)
F4 V2 4S Flight Controller
16A BLHeli_32 ESC
Motors: 1105 5000KV with connector
Props: 2" 4-Blades Props
Camera: CADDX Tarsier 4K
Canopy: Canopy for Beta85X 4K Version
Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire / PNP
Recommend battery: 4S 450mAh Battery (Not including)
5.8G FPV antenna
Flight time: 4min - 6min with 450mAh 4S battery

FC SPECIFICATIONS
 CPU: STM32F405 (Overclock to 240MHz)
 Six-Axis: MPU6000
 Size: 26mm x 26mm, whoop mounting pattern
 Firmware version: Betaflight OMNIBUSF4SD (OBSD)
 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)


ESC SPECIFICATIONS
 Support BLHELI_32
 Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
 Input voltage: 3-4S lipo
 Cotinue current: 16A
 Peak current: 19A
 Firmware target: BETAFPV-16A-32bit
 MCU: STM32F051K66


Camera SPECIFICATIONS
 Weight: 19.5g
 FOV: 4KF 2.8, FOV 150°(16/9), FPV FOV 165°(4/3)
 Lens: Dual lens 2.8 / 12Mega
 Image Sensor: 12M SONY sensor
 TV System: NTSC / PAL, can be changed
 Anti-Shake: Hardware anti-shake
 Scene Mode: Auto / Personage / Scenery / Defog
 Recording Timing Larm: OFF / 1mins / 3mins / 5mins / 10mins
 Horizontal Resolution: 1200TVL
 Image: 16:9 / 4: 3 (changeable)
 Camera OSD: Seperate OSD
 The camera tilt angle is switchable from 20 degree to 30 degree with ND8 fliter.

WHAT HAVE DONE TO SUPPORT 4S?
This Beta85X has upgraded in individual parts like FC, ESC, Motor, which can support 4S power with a steady performance and bring you into a glorious FPV world.

F4 FC & BLHeli_32 ESC

Support 4S Power. Written for ESC's that utilize 32-bit MCU. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
Using single N-channel MosFETs on ESC board, witch have a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
Current sensor included.
ESC is mounted on the frame by screws and connected with FC boards by cables.
Last Version: The performace of the ESC is limitted and could not stand 4S power on 85X for a long time. Besides, the ESC is connected to the FC board by header pins. When pluging the battery, the ESC will loose with the FC board and cause circut shot.


Power Capacitor
Soldering with 25V/220uf electrolytic capacitor, for reducing the defective rate caused by the instantaneous high voltage.

Last Version: Not power capacitor included, which have the risk that the permanently damage on ESC by impulse voltage when plug the battery.


1105 5000KV Motor
Lower 5000KV for new Beta85X 4S, which could support 4S power which won't cause the issue of overheat or burn (maybe the ESC). Also change motor cables from 30AWG to 28AWG.

Last Version: 1105 6000KV motors with 30AWG cables. In 4S power status, the motor will be overheat and damaged. Which may cause the burnt on the ESC.


Frame Stiffener Brace

The stiffener brace of carbon fiber can reinforce the Beta85X frame, avoid unstability caused by too strong power when Beta85x is flying.

Last Version: No stiffener brace included, which would result in seriously vibration on 4S power.

CADDX TARSIER 4K CAMERA
Tarsier camera is the first DVR boards that could support 4K@30fps recording. Here is the basic manual for you to use recording when get this Beta85X 4K drone.
¥ 31,620 SOLD OUT

※こちらの価格には消費税が含まれています。

※送料は別途発生いたします。詳細はこちら

送料について

この商品の配送方法は下記のとおりです。
  • 宅急便コンパクト

    ヤマトが提供する配送方法です。荷物追跡に対応しています。

    地域別設定
    • 北海道

      • 北海道 830円
    • 東北

      • 青森県 660円
      • 岩手県 660円
      • 宮城県 610円
      • 秋田県 660円
      • 山形県 610円
      • 福島県 610円
    • 関東

      • 茨城県 610円
      • 栃木県 610円
      • 群馬県 610円
      • 埼玉県 610円
      • 千葉県 610円
      • 東京都 610円
      • 神奈川県 610円
      • 山梨県 610円
    • 信越

      • 新潟県 610円
      • 長野県 610円
    • 北陸

      • 富山県 610円
      • 石川県 610円
      • 福井県 610円
    • 東海

      • 岐阜県 610円
      • 静岡県 610円
      • 愛知県 610円
      • 三重県 610円
    • 近畿

      • 滋賀県 660円
      • 京都府 660円
      • 大阪府 660円
      • 兵庫県 660円
      • 奈良県 660円
      • 和歌山県 660円
    • 中国

      • 鳥取県 720円
      • 島根県 720円
      • 岡山県 720円
      • 広島県 720円
      • 山口県 720円
    • 四国

      • 徳島県 720円
      • 香川県 720円
      • 愛媛県 720円
      • 高知県 720円
    • 九州

      • 福岡県 830円
      • 佐賀県 830円
      • 長崎県 830円
      • 熊本県 830円
      • 大分県 830円
      • 宮崎県 830円
      • 鹿児島県 830円
    • 沖縄

      • 沖縄県 830円

※12,000円以上のご注文で送料が無料になります。

通報する

<>外部サイトに貼る
外部サイトへの埋め込み方

下記コードをコピーして、あなたのwebサイトのHTMLに貼り付けてください。

関連商品

  • BETAFPV Canopy for EOS2 Camera BETAFPV Canopy for EOS2 Camera ¥ 306
  • F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32) F4 Brushless Flight Controller and ESC V2.0 (BLHeli_32) ¥ 7,550
  • BETAFPV F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S) BETAFPV F4 2-4S AIO Brushless Flight Controller 20A(BLHeli_S) ¥ 6,980

ショップの評価

  • 4S Whoop Cable Pigtail (XT30)

    4S Whoop Cable Pigtail (XT30)

    キャノピーにWhoop用が1つ入ってましたけど、全体的に最高です。予備パーツの在庫がいつもあったら助かります。

  • BETAFPV Canopy for EOS2 Camera

    BETAFPV Canopy for EOS2 Camera

  • BETAFPV 1105 Brushless Motors 5000KV (4S)

    BETAFPV 1105 Brushless Motors 5000KV (4S)

  • HX115 115mm HD Toothpick Drone(Futaba S-FHSS仕様)

    HX115 115mm HD Toothpick Drone(Futaba S-FHSS仕様)

  • Lipo Batteries Safety Handbag

    Lipo Batteries Safety Handbag

  • 特注品

    特注品

  • 4S Whoop Cable Pigtail (XT30)

    4S Whoop Cable Pigtail (XT30)

  • Tattu 450mAh 14.8V 75C 4S1P Lipo Battery Pack with XT30 Long Size

    Tattu 450mAh 14.8V 75C 4S1P Lipo Battery Pack with XT30 Long Size

  • Vector Gekko Tx Stick End

    Vector Gekko Tx Stick End

  • Vector 230mm バッテリーストラップ

    Vector 230mm バッテリーストラップ

  • Vector 190mm HDカム&バッテリー用ストラップ

    Vector 190mm HDカム&バッテリー用ストラップ

  • Vector Action Cam Mount

    Vector Action Cam Mount

    25度

  • Vector Landing Plate

    Vector Landing Plate

  • Vector VX-04 Arm(5inch)

    Vector VX-04 Arm(5inch)

  • Vector VX-04 Top Plate

    Vector VX-04 Top Plate

  • Vector CCD Mount (HS1190)

    Vector CCD Mount (HS1190)

  • Vector VX-04 Upper Frame

    Vector VX-04 Upper Frame

  • Vector VX-04 Lower Frame

    Vector VX-04 Lower Frame

  • EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)

    EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)

  • EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole)  Blue

    EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole) Blue